Reply to thread

Message

<blockquote data-quote="manslayer" data-source="post: 6151577" data-attributes="member: 603845">Hey guys, i&#039;m having some problems with my setup and was hoping someone could shed some light onto it.First here is my system:Pioneer Premier 790btAlpine type r coax speakers all around powered by MRP-550Two rockford fosgate 12&quot; D4 P3 subs in a sealed box being powered by a Hifonics BXI-1608DSo, the problem is that I am getting no noise out of the subs at all.&nbsp; The amp is getting power from the battery and is not in protect mode.&nbsp; I tried taking out the RCA&#039;s and plugging them back in but that did nothing, then I took out the subs and undid the wiring incase somewhere the wires got loose, then rewired them down to 1 ohm.&nbsp; Still no noise.&nbsp; I tested the subs and they came out as 1 ohm, so I know they aren&#039;t fried.&nbsp; The amp has power going to it and the protect light is not on.Does anyone want to try to lead me in the right direction as to what might be wrong?Thanks in advance!</blockquote>

[QUOTE="manslayer, post: 6151577, member: 603845"] Hey guys, i'm having some problems with my setup and was hoping someone could shed some light onto it. First here is my system: Pioneer Premier 790bt Alpine type r coax speakers all around powered by MRP-550 Two rockford fosgate 12" D4 P3 subs in a sealed box being powered by a Hifonics BXI-1608D So, the problem is that I am getting no noise out of the subs at all. The amp is getting power from the battery and is not in protect mode. I tried taking out the RCA's and plugging them back in but that did nothing, then I took out the subs and undid the wiring incase somewhere the wires got loose, then rewired them down to 1 ohm. Still no noise. I tested the subs and they came out as 1 ohm, so I know they aren't fried. The amp has power going to it and the protect light is not on. Does anyone want to try to lead me in the right direction as to what might be wrong? Thanks in advance! [/QUOTE]

Verification