Reply to thread

Message: <blockquote data-quote="F150Matt" data-source="post: 55411" data-attributes="member: 543857"><p>ok guys I know that with a perfect square or rectangle you have to take away the width of the board from the outer dimensions which would (L-1.5)(H-1.5)(W-1.5) but look at this box and these measurements.  I have a sloped front and a weird shaped back.  I know I should be able to figure this out but my brain just isn't working right now.  I came up with 8.122 ft^3 using the outer dimensions of this box.  I believe it may actually be too big if I were to go all the way to the top of my back glass.  Kicker recommends 3.25 max ft^3 per sub minus the cubic inches of the port, so I'm looking at about 7ft^3 I assume with the port???  Here is my drawing.</p></blockquote><p></p>

Top