Reply to thread

Message: <blockquote data-quote="subzero" data-source="post: 8427627" data-attributes="member: 600350">that amp is not the best amp.   I would just run it  one coil per  and use a mono signal to the amp inputs.     I think the amp will last longer that way.   If you wire the amp to 2 ohms, you will only get 260watts if your lucky, and only off either the left or right channel.    but if you do like I said, you will get 180 watts @ 4 ohms per channel per coil.I am assuming your stereo has a sub line level output that is mono.  If so, just use a "y" splitter and plug into amp inputs</blockquote>

Top