Reply to thread

Message: <blockquote data-quote="BumpinTypeR" data-source="post: 5625339" data-attributes="member: 607000"><p>i have the same setup...it pounds.  I have it in an suv and the stuff in my cupholders shake around...my rear view shakes like crazy...my roof flexes...etc.  I have a single 12" 4ohm type-r wired at 2ohms to the alpine mrp-m500 amp.  I built a custom ported box that is 2.15 cubic feet after displacements tuned to 37hz fb.  (the manual reccommends 36 hz fb/33hz f3 but i listen to rap/hip hop so i tuned alittle higher)</p></blockquote><p></p>

Top