Reply to thread

Message

<blockquote data-quote="YellerF150" data-source="post: 8262444" data-attributes="member: 661070"><p>So I decided to put the system I had on a shelf in the garage in my truck finaly. Rockford Fosgate Punch 500.2(500watt/2-channel) amp and 2 Rockford Punch 8&quot; subs Amp was last used about 2 years ago and worked flawlessly when removed. Subs were last used about 3 years and one was blown. So got the amp mounted were I want and all wired up then went friday and bought 2 SDX Audio 10s(250rms/500max each) and modifed my from the 8s to fit the 10s. Whole system worked flawlessly friday after I hooked it up rode around town with it on for hours, no problems. Then yesterday I leave for work(about a 40 min drive) and about 3/4 of the way to work the system just cuts off, so when I get home last checked the in-line fuse on the 12v power in line, and fine, amp has power and seems to be working, so I a 6.5&quot; speaker I had laying around and it has sound when hooked to the amp wires. So amp seems to have power and be working but I get nothing from the subs(they&#039;re days old)........What could be the problem? do I need to check my ground, is the amp going out, bad subs??</p></blockquote><p></p>

[QUOTE="YellerF150, post: 8262444, member: 661070"] So I decided to put the system I had on a shelf in the garage in my truck finaly. Rockford Fosgate Punch 500.2(500watt/2-channel) amp and 2 Rockford Punch 8" subs Amp was last used about 2 years ago and worked flawlessly when removed. Subs were last used about 3 years and one was blown. So got the amp mounted were I want and all wired up then went friday and bought 2 SDX Audio 10s(250rms/500max each) and modifed my from the 8s to fit the 10s. Whole system worked flawlessly friday after I hooked it up rode around town with it on for hours, no problems. Then yesterday I leave for work(about a 40 min drive) and about 3/4 of the way to work the system just cuts off, so when I get home last checked the in-line fuse on the 12v power in line, and fine, amp has power and seems to be working, so I a 6.5" speaker I had laying around and it has sound when hooked to the amp wires. So amp seems to have power and be working but I get nothing from the subs(they're days old)........What could be the problem? do I need to check my ground, is the amp going out, bad subs?? [/QUOTE]

Verification