Reply to thread

Message

<blockquote data-quote="fang_x" data-source="post: 6677182" data-attributes="member: 619407">Allright, so im a total noob with wiring, i had a 10inch sub installed in my jeep TJ to add more bass... Now after a while, i wanted to upgrade the sound a bit more, I replaced the two front speakers, and purchased a &quot;Sound Bar&quot; Its a speaker bar thats installed on the roll bars on the Jeep.so basically as i can figure this is my setup as it is<img src="http://i148.photobucket.com/albums/s2/fang_x/Untitled-1-4.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Now the soundbar is a Chinese peice of shit im sure, i got it mostly just because i was too lazy to try to create a custom sound bar for my car, i figured i would replace the speakers with some pioneers or something.Anyways, the site I orderd the bar from, said the Speakers have a 200 Watt peak power, and the output of my Head unit is only 50 watt,it says 50wX4, its a pioneer mofset something or otheras is its the front two Left And Right connected, this will be for the Rear Right and Rear Left, so im guessing I will just have to pull my head unit and connect the RR and RL to the appropriate wiring? or would i need an amplifier to achieve full potential of the speakers? do they sell smaller amplifiers? like a 200Watt amp? or 100 watt?, get two smaller 100 watts for each channel left and right?</blockquote>

[QUOTE="fang_x, post: 6677182, member: 619407"] Allright, so im a total noob with wiring, i had a 10inch sub installed in my jeep TJ to add more bass... Now after a while, i wanted to upgrade the sound a bit more, I replaced the two front speakers, and purchased a "Sound Bar" Its a speaker bar thats installed on the roll bars on the Jeep. so basically as i can figure this is my setup as it is [IMG]http://i148.photobucket.com/albums/s2/fang_x/Untitled-1-4.jpg[/IMG] Now the soundbar is a Chinese peice of shit im sure, i got it mostly just because i was too lazy to try to create a custom sound bar for my car, i figured i would replace the speakers with some pioneers or something. Anyways, the site I orderd the bar from, said the Speakers have a 200 Watt peak power, and the output of my Head unit is only 50 watt, it says 50wX4, its a pioneer mofset something or other as is its the front two Left And Right connected, this will be for the Rear Right and Rear Left, so im guessing I will just have to pull my head unit and connect the RR and RL to the appropriate wiring? or would i need an amplifier to achieve full potential of the speakers? do they sell smaller amplifiers? like a 200Watt amp? or 100 watt?, get two smaller 100 watts for each channel left and right? [/QUOTE]

Verification