Reply to thread

Message: <blockquote data-quote="rotormotor" data-source="post: 5329762" data-attributes="member: 578216">ok here are some preliminary pics.  i spend a few hours fiddling with the mounting lastnight.  the cage is staying but i clipped the latch hooks for the headunit, and removed the side clips on the HU.  I also trimmed the bezel ... i took off 7mm.  my plan is to drill a few holes in the cage and screw the cage directly to the HU.  We'll see how that goes tomorrow, but for now it at least fits.  Now to drill the holes and get a small ratcheting 90 degree screw driver.  its gonna be a ***** to remove down the road.  //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif  Now to find a place for the external processor/preamp //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif-Heath</blockquote>

Top