Reply to thread

Message

<blockquote data-quote="rotormotor" data-source="post: 5325821" data-attributes="member: 578216">i promise i will upload some photos of the car.&nbsp; this is a project car that i am building form the ground up... i disassembled the car down to the chassis and am upgrading everythting as i build it back up.&nbsp; I have a 3rotor engine that is going in it (larger than the normal FD engine) and the goal is a 600HP street car.&nbsp; if i listed everything im doing to the car it would be a 5 page long list... but i am trying to leave no stone unturned.as far as audio the setup is as follows-New sound deadening rubberized undercoat sprayed under the chassis/wheel wells-second skin damplifier on every surface i could get to-sound insulating foam injected in the floor rails and A-pillars (still have to do that)-Nakamichi CD700II head unit-Polk SR6500&#039;s in front and back (front set up as separates, rears as coax) using the polk x-overs-Audison VRx 4.300 amp-Stock bose rear wave sub *unfortunately*&nbsp; (I know im gonna take alot of heat for this one... but I dont have room for a dedicated sub/enclosure and it has to look stock!&nbsp; all im looking for is some low end fill... //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif i cant think of any other decent solutions at the moment )anyway, ill get some pictures up.&nbsp; but first... how the hell do i flush mount this stupid head unit !!&nbsp; -Heath</blockquote>

[QUOTE="rotormotor, post: 5325821, member: 578216"] i promise i will upload some photos of the car. this is a project car that i am building form the ground up... i disassembled the car down to the chassis and am upgrading everythting as i build it back up. I have a 3rotor engine that is going in it (larger than the normal FD engine) and the goal is a 600HP street car. if i listed everything im doing to the car it would be a 5 page long list... but i am trying to leave no stone unturned. as far as audio the setup is as follows -New sound deadening rubberized undercoat sprayed under the chassis/wheel wells -second skin damplifier on every surface i could get to -sound insulating foam injected in the floor rails and A-pillars (still have to do that) -Nakamichi CD700II head unit -Polk SR6500's in front and back (front set up as separates, rears as coax) using the polk x-overs -Audison VRx 4.300 amp -Stock bose rear wave sub *unfortunately* (I know im gonna take alot of heat for this one... but I dont have room for a dedicated sub/enclosure and it has to look stock! all im looking for is some low end fill... [IMG]//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif[/IMG] i cant think of any other decent solutions at the moment ) anyway, ill get some pictures up. but first... how the hell do i flush mount this stupid head unit !! -Heath [/QUOTE]

Verification