My TCAB Flex Video...Finally

[jrpro130 10+ year member]

http://realmofexcursion.com/videos/REAudio/sx18.6.wmv
70% of the flex.... and it still looks weak compared to how it is in real life

isn't it so much more than in the video. Mine is insane compared to the video

 

[imaspaceguy90 10+ year member]

COol video man, thats alot of movment.

 

[JohnBlayz142 10+ year member]

Are flexing body panels teh new hotness?

 

[BoomCrew 10+ year member]

jrpro seeing your vid made me cream myself, i love that vid, hopefully after i do the big 3 i will have something, it would be cool to have some flex, or at least be that loud

 

[JohnBlayz142 10+ year member]

jrpro seeing your vid made me cream myself, i love that vid, hopefully after i do the big 3 i will have something, it would be cool to have some flex, or at least be that loud

My roof flexes quite a bit with ~300wrms to an SX15. The box is oversized and gets quite low, which is why I do so much with so little power.

 

[jrpro130 10+ year member]

My roof flexes quite a bit with ~300wrms to an SX15. The box is oversized and gets quite low, which is why I do so much with so little power.

****, my roof barely moves //content.invisioncic.com/y282845/emoticons/blush.gif.99bc659ee2012b7d826165e26fb5eebe.gif

i put a nickel on it and all it did was slide off...but i also have a reinforced headliner (supposidly like dynamat extreme...it's stock on the edge model ranger) and i have the same thing in my floor...

i just got done dynamat extreming my doors...holy crap it makes a difference. Close to no noise coming from them...next is my back panels...

And yes, I creamed myself when I installed it...it was NICE //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

and yes, flexing body panels is the new hawtness....I LIKEY

 

[jrpro130 10+ year member]

jrpro seeing your vid made me cream myself, i love that vid, hopefully after i do the big 3 i will have something, it would be cool to have some flex, or at least be that loud

big 3 helped a TON...

thanks for the props man....

you should be able to flex a bit...it took me a lot to flex my truck (the one ten wasn't doing a good job)

 

[JohnBlayz142 10+ year member]

****, my roof barely moves //content.invisioncic.com/y282845/emoticons/blush.gif.99bc659ee2012b7d826165e26fb5eebe.gif

SUV with no roof racks ftw (flexing wise anyway) //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[jrpro130 10+ year member]

SUV with no roof racks ftw (flexing wise anyway) //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

haha...explorer???

i know they love to flex roofs...

 

[kotec123 10+ year member]

very nice man...congrats

 

[JohnBlayz142 10+ year member]

haha...explorer???
i know they love to flex roofs...

01 Grand Cherokee...I just took the racks off, I like the stance...My buddy's Explorer with no racks flexes pretty hard //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[glowin3232 10+ year member]

I have a 12" RE SE ported with 600wrms and my Ranger doesnt flex anywhere near as much as your truck, but the back wall does rattle like a *****. I saw your post on R-F earlier, very nice setup. Also, whereabout in south FL are you?

 

[JohnBlayz142 10+ year member]

I have a 12" RE SE ported with 600wrms and my Ranger doesnt flex anywhere near as much as your truck, but the back wall does rattle like a *****. I saw your post on R-F earlier, very nice setup. Also, whereabout in south FL are you?

Do you go to UCF? I'll be back there in a couple months..

 

[wgaede 10+ year member]

http://realmofexcursion.com/videos/REAudio/sx18.6.wmv
70% of the flex.... and it still looks weak compared to how it is in real life

You camera and trunk are FUCKED!!1 haha nice vid.

Original poster has a nice vid too. Next time shut your doors and roll a window halfway down, see if that moves a bit. More vids! NOW!

 

[AndonD454 10+ year member]

bout 989 watts total...without imp rise
probably about 3-400 a piece...i'm guessing

i just threw that vid together...i'm a freelance video editor, but the apple is at school //content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif

LMK what you guys think

how did you come to that number? did you bench the amp? if so is that @ 1 ohm? (i hope not)

i compared my amp (1605d) striaght up with a rockford benched at over 1000rms and my amp was very noticably louder..