Reply to thread

Message: <blockquote data-quote="audiobaun" data-source="post: 7937980" data-attributes="member: 634282"><p>If you did not have the issue until you added the other amp at that ground location, then that may very well be the culprit.It could very well be too that the ground wiring is too small,both the ground and supply should be the same size in reality.4 ga power wire and 12 ga ground wire when 4ga min for power and ground on an amp,isnt good.Ive seen this done several ocassions, and this issue is mainly been the culprit.That could be the issue as well, or not a cleand off mounting surface?Something to be considered, other than that trial and error to begin trouble shooting/ruling out</p></blockquote><p></p>

Top