zerocarpileup 10+ year member
The Birds The Word!!!!!!!
I have a barely used M3000.1D im looking to play my 15.2" HCCAs at .5 ohm. so im looking to do an even trade for a MMats M3000.05D
My amp is 10/10 in fuctionality and 10/10 cosmetically with acception to the mounting feet having been used. other than that this amp is mint and in the box. im only looking for a M3000.05 so let me know if anyone wants to trade for the 1 ohm
M3000.05D/M3000.1D
M3000.05D M3000.1D
STABLE TO: ½ ohm 1 ohm
CONTINUOUS (RMS) POWER
@ 13.8 Volts:
Watts @ .5 ohms mono 1 X 3000 N/A
Watts @ 1 ohms mono 1 X 1700 1 X 3000
Watts @ 2 ohms mono 1 X 850 1 X 1700
Idle Current: 1.5 amp 1.5 amp
Signal to Noise Ratio A-Wtd:
Total Harmonic Distortion: 0.3% 0.3%
Channel Separation: N/A N/A
Input Sensitivity: 150mV-2.5V 150mV-2.5V
Slew Rate: 13V / Usec 13V / Usec
Fuse Rating / Dual: 100 amp 100 amp
Dimensions:
Height: 2.25” 2.25”
Width: 9.5” 9.5”
Length: 13” 13”
General Information:
Frequency Response:
Low-pass Filter: Variable 24db, 77 to 275Hz
Battery Connectors: 2 Gauge
Speaker Connectors: 8 Gauge
My amp is 10/10 in fuctionality and 10/10 cosmetically with acception to the mounting feet having been used. other than that this amp is mint and in the box. im only looking for a M3000.05 so let me know if anyone wants to trade for the 1 ohm
M3000.05D/M3000.1D
M3000.05D M3000.1D
STABLE TO: ½ ohm 1 ohm
CONTINUOUS (RMS) POWER
@ 13.8 Volts:
Watts @ .5 ohms mono 1 X 3000 N/A
Watts @ 1 ohms mono 1 X 1700 1 X 3000
Watts @ 2 ohms mono 1 X 850 1 X 1700
Idle Current: 1.5 amp 1.5 amp
Signal to Noise Ratio A-Wtd:
Total Harmonic Distortion: 0.3% 0.3%
Channel Separation: N/A N/A
Input Sensitivity: 150mV-2.5V 150mV-2.5V
Slew Rate: 13V / Usec 13V / Usec
Fuse Rating / Dual: 100 amp 100 amp
Dimensions:
Height: 2.25” 2.25”
Width: 9.5” 9.5”
Length: 13” 13”
General Information:
Frequency Response:
Low-pass Filter: Variable 24db, 77 to 275Hz
Battery Connectors: 2 Gauge
Speaker Connectors: 8 Gauge