Reply to thread

Message: <blockquote data-quote="AndonD454" data-source="post: 1052755" data-attributes="member: 560628">make sure the wires from the HU to the amp are for sure correct. make sure your fuse isnt blown (agu fuses are tricky sometimes and look fine) make sure your ground is still cool, etc etc.. just check every wire to the amp.is the power light on or off.. cause if its on and theres no sound.. then after you check amp settings test the sub coils and then check HU settings i suppose..im sure you didnt want a post this vague but sometimes theres no way to tell until you triple check everything</blockquote>

Top