Reply to thread

Message

<blockquote data-quote="SAinsworth43" data-source="post: 8210261" data-attributes="member: 658981">The next thing i did was build the wiring harness for my deck. I didnt take any in-progress pics of the soldering work because well, its solder and heat shrink. But on the inside everything is soldered and shrunk, positive wires and battery leads etc have red shrink, negatives have white. Here is what the harness ended up coming out looking like:<img src="http://i1290.photobucket.com/albums/b540/sainsworth43/101_1736_zps93c4fc08.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Used 3/4 TechFlex Cleancut Braided Sleeve (which also fits perfectly on Knu Kolossus Flex) on it to give it an overall cleaner look. the two wires outside the sleeve is my ground (will be direct ground to metal, not through wiring harness.) and my remote turn on lead.Even though it doesnt help to prove that i soldered everything up, here is the soldering stuff that i bought for this project, along with the harness.<img src="http://i1290.photobucket.com/albums/b540/sainsworth43/101_1737_zpsb536a73f.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />That pretty much all there is to the wiring harness, and thats all i got done today. I have a full day to work on it tomorrow and hope to get alot done. As i said, this thread will be bumped in the AM.</blockquote>

[QUOTE="SAinsworth43, post: 8210261, member: 658981"] The next thing i did was build the wiring harness for my deck. I didnt take any in-progress pics of the soldering work because well, its solder and heat shrink. But on the inside everything is soldered and shrunk, positive wires and battery leads etc have red shrink, negatives have white. Here is what the harness ended up coming out looking like: [IMG]http://i1290.photobucket.com/albums/b540/sainsworth43/101_1736_zps93c4fc08.jpg[/IMG] Used 3/4 TechFlex Cleancut Braided Sleeve (which also fits perfectly on Knu Kolossus Flex) on it to give it an overall cleaner look. the two wires outside the sleeve is my ground (will be direct ground to metal, not through wiring harness.) and my remote turn on lead. Even though it doesnt help to prove that i soldered everything up, here is the soldering stuff that i bought for this project, along with the harness. [IMG]http://i1290.photobucket.com/albums/b540/sainsworth43/101_1737_zpsb536a73f.jpg[/IMG] That pretty much all there is to the wiring harness, and thats all i got done today. I have a full day to work on it tomorrow and hope to get alot done. As i said, this thread will be bumped in the AM. [/QUOTE]

Verification