Reply to thread

Message

<blockquote data-quote="ThxOne" data-source="post: 8697482" data-attributes="member: 675210">So I have been sitting here and thinking about the stereo. I have a DSP. I am running active. It&#039;s not a bad stereo. It is loud... sounds clean to me and the imaging isn&#039;t bad... again, to me. I don&#039;t think it is what I want. I don&#039;t need 3 way active front stage. I don&#039;t need a DSP when my head unit will do active. Soooooooo......I am going to run a 4ohm 6.5&quot; and a 4ohm tweeter in each door. (Active).I am going to run two 10&quot; subs at 1ohm. (Active)I am going to run a 4 channel Punch P600X4 (Mids and Tweets)I am going to run a mono Punch P1000X1BD (Subs)I am going to run the Kenwood HU until I get the Pioneer W4500NEXI want to run the Punch Pro 6.5&quot; midsI want to run the RF T2T-S TweetersI want to run two Punch P3D4 10&quot; SubsIt should still have decent clarity but it should get louder than it does now. The tweeters have a 90db sensitivity and the mids are 92.5db so throwing Punch&#039;s &quot;75wrms&quot; (129w per channel dynamic) at them should get pretty freaking loud.Should be simple to crossover:Subs - 80hz @??dbMids - 80hz - 3.5K - 4K @??dbTweets - 3.5k - 4K @??db &quot;Off Axis&quot;It&#039;s simple and I have ALL the wiring already run. All I have to do is swap out some components, remove the DSP, set my HU to Active and I should be good to go. I do have to swap out my Krystal RCA cables for my Stinger 8000 RCA&#039;s. I will shit myself if it sounds better than it does now.Thoughts?</blockquote>

[QUOTE="ThxOne, post: 8697482, member: 675210"] So I have been sitting here and thinking about the stereo. I have a DSP. I am running active. It's not a bad stereo. It is loud... sounds clean to me and the imaging isn't bad... again, to me. I don't think it is what I want. I don't need 3 way active front stage. I don't need a DSP when my head unit will do active. Soooooooo...... I am going to run a 4ohm 6.5" and a 4ohm tweeter in each door. (Active). I am going to run two 10" subs at 1ohm. (Active) I am going to run a 4 channel Punch P600X4 (Mids and Tweets) I am going to run a mono Punch P1000X1BD (Subs) I am going to run the Kenwood HU until I get the Pioneer W4500NEX I want to run the Punch Pro 6.5" mids I want to run the RF T2T-S Tweeters I want to run two Punch P3D4 10" Subs It should still have decent clarity but it should get louder than it does now. The tweeters have a 90db sensitivity and the mids are 92.5db so throwing Punch's "75wrms" (129w per channel dynamic) at them should get pretty freaking loud. Should be simple to crossover: Subs - 80hz @??db Mids - 80hz - 3.5K - 4K @??db Tweets - 3.5k - 4K @??db "Off Axis" It's simple and I have ALL the wiring already run. All I have to do is swap out some components, remove the DSP, set my HU to Active and I should be good to go. I do have to swap out my Krystal RCA cables for my Stinger 8000 RCA's. I will shit myself if it sounds better than it does now. Thoughts? [/QUOTE]

Verification