Reply to thread

Message: <blockquote data-quote="Joeyku" data-source="post: 6777047" data-attributes="member: 621347"><p>Thanks man.  The piece you're referring to is the cover for my amp rack.  All it is, is a sheet of 1/4" thick foam board!  To get the letters resessed I first had to use a utility knife to cut each letter out!  That took forever!  Once the letters were cut I applied the felt.  I waited for the spray glue to dry then I took the cap from a sharpie and worked the felt into the letter basically stretching it and wearing out a little as well.  I repeated that process 5-6 times until I was happy with.  Really easy to do, just takes a while.</p></blockquote><p></p>

Top