Reply to thread

Message: <blockquote data-quote="Alex JB" data-source="post: 5525598" data-attributes="member: 602795">spent an hour or so playing with the crossover frequency and taking the sealing plate off and on.the ported setup is obviously much louder at and up to 20hz above tuning, but the low extension of the oversized sealed setup is way better and I defo choose that over the loudness of the ported.next step is to reduce the volume so I can switch over to my 500rms amp wire to 2ohm and see if I can get to the same audible volume as the ported does at tuning.</blockquote>

Top