Mtx4004

[ap0091 10+ year member]

These are the specs of the amp:

http://www.mtx.com/caraudio/archive/mxaAmps/mxa4004.cfm

Specifications

Power Output: 50 Watts RMS x 4 channels at 4 Ohms ≤ 1% THD+N

Signal-to-Noise Ratio: 80 dBA (reference: 1 W output)

Additional Power Output: 100 Watts RMS x 4 channels at 2 Ohms ≤ 1% THD+N

200 Watts RMS x 2 channels bridged at 4 Ohms ≤ 1% THD+N

THD+N (Distortion):

Frequency Response: 20 Hz to 20 kHz (-3dB)

Maximum Input Signal: 5V

Maximum Sensitivity: 100mV

Dimensions: 14.37 x 9.72 x 2.5 (365mm x 247mm x 63.5mm)

Currently i have only 4 kenwood speakers each at 25W running on this amp..

What is the Additional Power Output?

Can i also hookup 2 200W Subs @ 2ohm with my speakers?

Click to read more...

 

[SicAudio 5,000+ posts]

u need a mono block for subs

 

[ap0091 10+ year member]

Well i already have a Kicker ZX400.1 or something mono class d amp for my sub.. but i was just wondering what is the "additional power output", what can i do with it? and where would i hook up speakers because ive already used the 4 speaker slots

 

[ap0091 10+ year member]

up