Reply to thread

Message

<blockquote data-quote="timma100" data-source="post: 7908737" data-attributes="member: 637068"><p>I figured, I&#039;m not sure what to think of them any more... Here is the basis of the issue, playing a test tone, sub gets moving and resonates fine, playing music, doesnt move at all. Personally I think its an RCA voltage issue from the deck 80PRS, and im going to get a line driver for the sub RCAs. But the **** guy at Elite Audio Solutions (they did the install, I bought the parts) said that the box is wrong and because its wrong, its giving the woofer no output, and when I say no output, I mean on music there is hardly any excursion or db. The amp is a SAZ1000D, the sub is D2 wired at 1ohm and I double/triple checked, the coils are in phase, but I do get a weird ticking sound at higher volumes.. Also rabbit they swore that the sub didn&#039;t fit into the box when I brought the parts in, so they gave me **** about having a tard box. Even still I said the people who built it knew what they were doing.. After they &quot;made it fit&quot; I found part of the gasket sticking out. So i pulled the sub, took of the gasket, and sealed around the opening with real gasket tape. All this service for $500 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I am still set that the issue is from low RCA voltage to the sub amp, the dude went back and turned the gain ALL the way up and then the sub started moving to music. Anyway, they wont believe that its any other issue than the box.&nbsp; /rant</p></blockquote><p></p>

[QUOTE="timma100, post: 7908737, member: 637068"] I figured, I'm not sure what to think of them any more... Here is the basis of the issue, playing a test tone, sub gets moving and resonates fine, playing music, doesnt move at all. Personally I think its an RCA voltage issue from the deck 80PRS, and im going to get a line driver for the sub RCAs. But the **** guy at Elite Audio Solutions (they did the install, I bought the parts) said that the box is wrong and because its wrong, its giving the woofer no output, and when I say no output, I mean on music there is hardly any excursion or db. The amp is a SAZ1000D, the sub is D2 wired at 1ohm and I double/triple checked, the coils are in phase, but I do get a weird ticking sound at higher volumes.. Also rabbit they swore that the sub didn't fit into the box when I brought the parts in, so they gave me **** about having a tard box. Even still I said the people who built it knew what they were doing.. After they "made it fit" I found part of the gasket sticking out. So i pulled the sub, took of the gasket, and sealed around the opening with real gasket tape. All this service for $500 [IMG]//content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif[/IMG] I am still set that the issue is from low RCA voltage to the sub amp, the dude went back and turned the gain ALL the way up and then the sub started moving to music. Anyway, they wont believe that its any other issue than the box. /rant [/QUOTE]

Verification