MOD PLEASE STICKY THIS! alarm bench prep

[CaliforniabOY5 10+ year member]

well that was a waste......kthanxbi

 

[Shyne151 10+ year member]

ehh, to each their own... i do mine quite a bit different.

 

[jiggy2dmax 10+ year member]

Everyone may have a different way but for someone looking to get into installing pt/ft, its a nice tutorial. Murph is prolly the most knowledgeable person I've ever encountered in regards to alarms. The pics of his installs are top notch and wish I had someone around me that would do work like that.

 

[azbass 5,000+ posts]

Then, especially @ CC... when they come back for their FREE uninstall (for the life of the vehicle)... what happens when you need them for the next vehicle they want to put it on?
nG

well the store should order all NEW wire harnesses anyway. and use the same brain. so that should not be an issue

 

[tapout 5,000+ posts]

I've found that when an OP asks for a thread to be stickied, said thread usually sucks.

Stickies just happen. You cant force it.

 

[Worlddre 5,000+ posts]

has never bench prepped any alarm

 

[req 5,000+ posts]

the best part was that he didnt even describe how he shot the wires or tested any locations.

he didnt describe why he used what wires for that car, he just said cut wires you dont need off and tape everything up.

nothing of significane was explained at all. IIRC - dont dodge neons have resistor based locks too? or is it just two different circuits that need a diode in between?

 

[azbass 5,000+ posts]

most all new dodges use resistors for locks.

 

[azbass 5,000+ posts]

all door/trunk/hood/ pins Should be diode isolated from eachother

 

[req 5,000+ posts]

i knew it was something like that. its been a while. i hate resistor locks //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[azbass 5,000+ posts]

oh good times.

 

[IamMurph 10+ year member]

Hey guys I see you found my BENCH PREP document. That's right it's a bench prep document for installers. Everyone has to start somewhere.

The reason no pins are removed is for future upgrades. I believe in doing security installation not alarms. A T tap will never touch my work. Solder and tape only.

That I know of CC does not pull alarms for free. That would be a waste of money. This type of install is labor intensive.

Everyone has their own style and I am not saying mine is the best. I have not seen anyone else trying to teach the basics. I am working with a company on security training from basic to advanced integration. We will offer onsite training and more.

Just to give you haters a little background. I have 14 years experience in retail mobile installation. I am one of the contributors to the new MECP master’s guide. I have been of the forums for over 8 years. For some strange reason I like to help people.

 

[THUNDERBIRD 10+ year member]

i asked for it to be stickied as a helper not a this is how it is done. i bet your training will be better than the select products one.

 

[IamMurph 10+ year member]

i asked for it to be stickied as a helper not a this is how it is done. i bet your training will be better than the select products one.

That is the plan.

 

[azbass 5,000+ posts]

Hey guys I see you found my BENCH PREP document. That's right it's a bench prep document for installers. Everyone has to start somewhere.
The reason no pins are removed is for future upgrades. I believe in doing security installation not alarms. A T tap will never touch my work. Solder and tape only.

That I know of CC does not pull alarms for free. That would be a waste of money. This type of install is labor intensive.

Everyone has their own style and I am not saying mine is the best. I have not seen anyone else trying to teach the basics. I am working with a company on security training from basic to advanced integration. We will offer onsite training and more.

Just to give you haters a little background. I have 14 years experience in retail mobile installation. I am one of the contributors to the new MECP master’s guide. I have been of the forums for over 8 years. For some strange reason I like to help people.

nah uhh it was my BENCH PREP document