Mint Condition Image Dynamics i5800 5 channel amplifier!!

  • 4
    Participant count
  • Participant list
Status
Not open for further replies.

djm4rshm2llow
10+ year member

CarAudio.com Elite
Item(s) for Sale: i5800 5 channel

Item(s) Description/Condition:

Mint condition, not a scratch on it

Price:

290 shipped

Shipping and Miscellaneous Item Information:

Shipping is included!

Number of Channels 5

4 Ohms Power (Watts) 65 X 4 + 250 X 1RMS

2 Ohms Power (Watts) 90 X 4 + 400 X 1 RMS

4 Ohms Mono Power (Watts) 180 X 2 + 400 X 1 RMS

THD @ rated power 0.50%

CEA Power 2ohm @ 14.4v 100 X 4 + 425 X 1

THD typical below full power

Frequency Response 20Hz - 22kHz

S/N Ratio >94db

Damping Factor 4ohms @50 Hz

>150

Low-Pass Crossover Freq. (Hz) 40 - 250Hz

High-Pass Crossover Freq. (Hz) 40 - 250Hz

Crossover Slope 12dB

Input Sensitivity 0.5-4.0 Volts

Dimensions

2.25" H X 8.0" W X 18.5" L

Fuses/ ATC Style 2 X 40A

Subwoofer EQ Freq 40Hz

Variable Subwoofer EQ 0/+12dB

Item Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

13fc1a60.jpg


I will get some better pics up here soon, I am doing this on my phone so its a pita.

 
Last edited by a moderator:
Item(s) for Sale: i5800 5 channel



Item(s) Description/Condition:

Mint condition, not a scratch on it

Price:

290 shipped

Shipping and Miscellaneous Item Information:

Shipping is included!

Number of Channels 5

4 Ohms Power (Watts) 65 X 4 + 250 X 1RMS

2 Ohms Power (Watts) 90 X 4 + 400 X 1 RMS

4 Ohms Mono Power (Watts) 180 X 2 + 400 X 1 RMS

THD @ rated power 0.50%

CEA Power 2ohm @ 14.4v 100 X 4 + 425 X 1

THD typical below full power

Frequency Response 20Hz - 22kHz

S/N Ratio >94db

Damping Factor 4ohms @50 Hz

>150

Low-Pass Crossover Freq. (Hz) 40 - 250Hz

High-Pass Crossover Freq. (Hz) 40 - 250Hz

Crossover Slope 12dB

Input Sensitivity 0.5-4.0 Volts

Dimensions

2.25" H X 8.0" W X 18.5" L

Fuses/ ATC Style 2 X 40A

Subwoofer EQ Freq 40Hz

Variable Subwoofer EQ 0/+12dB

Item Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

13fc1a60.jpg


I will get some better pics up here soon, I am doing this on my phone so its a pita.
Im not seeing a edit button so heres some more pics //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

85b55682.jpg


53079142.jpg


1c234761.jpg


 
Status
Not open for further replies.
Activity
No one is currently typing a reply...

Similar threads

Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
0
696
Try to reset again and if that doesn't work, try updating the firmware. To update the firmware for Alpine X800D, you can follow the instructions...
1
915
This head unit has no power antenna adapter. So the image you are getting is not coming in from the correct program. Like if you were on an AM...
1
889

About this thread

djm4rshm2llow

10+ year member
CarAudio.com Elite
Thread starter
djm4rshm2llow
Joined
Location
Mandeville Louisiana
Start date
Participants
Who Replied
Replies
21
Views
2,982
Last reply date
Last reply from
djm4rshm2llow
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top