michaelking
10+ year member
Junior Member
I have a 2006 Chevy Impala (Without Bose System) and I decided to with the Metra 70-2105 wiring harness to a Kenwood Excelon kdc x492 head unit. The seperate 12 volt accessory wire will need to be hooked up to an existing 12 volt accessory wire (Can't use the the Red 12 Volt Acc On Harness).
I know that the:
-Yellow – 12V Constant
-Red – 12V Accessory (Must find and use seperate accessory wire, plus why does this wire have a spade connector crimped onto the end of it, anyone know what the use of that is)-Black - Ground
-Orange – Dash Light Dimmer/Illumination (I do not see an orange wire, Instead I'm seeing a blue wire-not sure what I'm going to use that for)
-Green – Left Rear Speaker (+)
-Green with Black Stripe Left Rear Speaker (-)
-White – Left Front Speaker (+)
-White with Black Stripe – Left Front Speaker (-)
-Purple – Right Rear Speaker (+)
-Purple with Black Stripe – Right Rear Speaker (-)
-Gray – Right Front Speaker (+)
-Gray with Black Stripe – Right Front Speaker (-)
http://www.sonicelectronix.com/pictures.php?id=12646
I know that the:
-Yellow – 12V Constant
-Red – 12V Accessory (Must find and use seperate accessory wire, plus why does this wire have a spade connector crimped onto the end of it, anyone know what the use of that is)-Black - Ground
-Orange – Dash Light Dimmer/Illumination (I do not see an orange wire, Instead I'm seeing a blue wire-not sure what I'm going to use that for)
-Green – Left Rear Speaker (+)
-Green with Black Stripe Left Rear Speaker (-)
-White – Left Front Speaker (+)
-White with Black Stripe – Left Front Speaker (-)
-Purple – Right Rear Speaker (+)
-Purple with Black Stripe – Right Rear Speaker (-)
-Gray – Right Front Speaker (+)
-Gray with Black Stripe – Right Front Speaker (-)
http://www.sonicelectronix.com/pictures.php?id=12646