Memphis mojo setup

magrafab

Junior Member
Rating: 0%
0 0 0
Item(s) for Sale:

4 12" memphis mojo subs and mojo amp and 2 xs power batteries

Item(s) Description/Condition:

I would like to start out by saying that i am not a pro on high end car audio. I have always had a couple subs and an amp but nothing special.

I just bought a truck that was done up right and professionally designed and installed. That being the case i need to start using the truck like a truck again so i need to let go of the system. I thought this might be a good place to start.

What i am selling is

4 12" mojo subs

1 mojo amp

Professionally built Custom box

2 xs power batteries

All wiring in between and fuse blocks

Im sorry i dont have specifics on everything but i can look deeper if i get any intrest.

Price:

Please make an offer

Shipping and Miscellaneous Item Information:

Im in atlanta but we can probably figure something out.

Item Pictures:

(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

 
You must post pictures with username and date, along with a price. This isn't craigslist.

It's simply so that people know you have the product you're selling. Otherwise, anyone could make a listing for lots of expensive equipment, take money, and not come back.

 
Thanks, ill do photobucket.

I just read about your build. Ill take some good shots tomorrow. The truck i got is a 4 door f250 and has a nice blow through set up all professionally done. Memphis in the back and audison in the front. I talked to the shop that did the build and he spent about 30k for it all.

 
Thanks, ill do photobucket. I just read about your build. Ill take some good shots tomorrow. The truck i got is a 4 door f250 and has a nice blow through set up all professionally done. Memphis in the back and audison in the front. I talked to the shop that did the build and he spent about 30k for it all.

Lmao 30k for a 2-3k install.

 
Heres the link to my photo bucket album for what I'm selling.

Mojo F250 Story by builtinbetter | Photobucket

Yes i know what the guy spent is a real number because i called the shop that did it to get an idea of what wen in and how it will come back out.

It shouldn't be too bad pulling it out and tacking some sheet metal over the holes and re lining the bed, its gonna have a tool box there any way so you won't see it. As for the side you won't see that either because of the seat.

it wasn't just the subs and amp that he paid for. They did the custom box with lighting, 3 xs batteries, 1 in the front, 2 in the back, ho alternator, python alarm( which controls remote start and 2 sets of box lighting), custom speaker pillars (which they said had about 1k worth of speakers in each), audition bit one, entire truck was matted, and there are 2 more amps under the back seat which power interior speakers( i can't even see what the are without pulling the seat!) i know I'm forgetting a pile of stuff.

I have a custom cabinet shop and i traded the previous owner a small kitchen for the truck and $2500. it was a deal i just couldn't pass up, it has been maintained meticulously.

I hate to piece it out, i would rather sell the whole truck to someone that would appreciate it for what it is but i haven't gotten any offers on cl for it. so its time to rebirth it as a truck again.

 
I dont have a lot of knowledge on this grade of equipment or why it was done the way it was but what i do know is that it is way more than i will ever need. I have turned it up about twice and thats it. It is easily the loudest system ive ever experienced. It kind of hurts your head and chest at the same time.

 
Heres the link to my photo bucket album for what I'm selling. Mojo F250 Story by builtinbetter | Photobucket

Yes i know what the guy spent is a real number because i called the shop that did it to get an idea of what wen in and how it will come back out.

It shouldn't be too bad pulling it out and tacking some sheet metal over the holes and re lining the bed, its gonna have a tool box there any way so you won't see it. As for the side you won't see that either because of the seat.

it wasn't just the subs and amp that he paid for. They did the custom box with lighting, 3 xs batteries, 1 in the front, 2 in the back, ho alternator, python alarm( which controls remote start and 2 sets of box lighting), custom speaker pillars (which they said had about 1k worth of speakers in each), audition bit one, entire truck was matted, and there are 2 more amps under the back seat which power interior speakers( i can't even see what the are without pulling the seat!) i know I'm forgetting a pile of stuff.

I have a custom cabinet shop and i traded the previous owner a small kitchen for the truck and $2500. it was a deal i just couldn't pass up, it has been maintained meticulously.

I hate to piece it out, i would rather sell the whole truck to someone that would appreciate it for what it is but i haven't gotten any offers on cl for it. so its time to rebirth it as a truck again.
That is no where near 30k worth of work, but the install is very clean.

If your gonna sell that here you may only get near 2-3k for it all.

Just pull it all out and sell it piece by piece or just sell the truck as a whole locally.

 
I dont have a lot of knowledge on this grade of equipment or why it was done the way it was but what i do know is that it is way more than i will ever need. I have turned it up about twice and thats it. It is easily the loudest system ive ever experienced. It kind of hurts your head and chest at the same time.

It's just basic mainstream equipment. U need to get model numbers of the equipment so you know what your selling. The Memphis amp is the 4K and u will prly get around $600 for it. You will prly get $150 for each Memphis subwoofer. Prly $125 per used battery.. What I do when selling stuff i look up what other have sold the same equipment for and then price mine accordingly. Hope that helps

 
I know i haven't listed specifications because the stuff is difficult to acces. I wanted to see if there was any intrest before digging deeper. I just thought that perhaps there would be someone on here that may want it.

I am not about to put an asking price because i dont want to be picked apart. If someone wants it just make an offer, im a fair person and i have an idea what ill get. If nobody wants it I'll pull the thread.

 
I know i haven't listed specifications because the stuff is difficult to acces. I wanted to see if there was any intrest before digging deeper. I just thought that perhaps there would be someone on here that may want it. I am not about to put an asking price because i dont want to be picked apart. If someone wants it just make an offer, im a fair person and i have an idea what ill get. If nobody wants it I'll pull the thread.
Dont forget alanta only has a small share of community here.

Do you plan to ship the entire blow through? That would cost some money to ship.

 
I know i haven't listed specifications because the stuff is difficult to acces. I wanted to see if there was any intrest before digging deeper. I just thought that perhaps there would be someone on here that may want it. I am not about to put an asking price because i dont want to be picked apart. If someone wants it just make an offer, im a fair person and i have an idea what ill get. If nobody wants it I'll pull the thread.
How much for the and the piece that says AUDISON on it

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

magrafab

Junior Member
Thread starter
magrafab
Joined
Location
atlanta, ga
Start date
Participants
Who Replied
Replies
16
Views
1,469
Last reply date
Last reply from
michaellane
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top