Reply to thread

Message

<blockquote data-quote="martiandancer31" data-source="post: 7452479" data-attributes="member: 616516">molded the right side of the trunk today:<img src="http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1602.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />this was a giant pain in the ballsack, mainly because of the trunk opening and closing. Essentially, I built a small frame in that area that barely clears the bars in both the open and closed positions, hot glued it into the trunk (for easy removal later), then taped around that. I made a small mistake due to the wire looms attached to the trunk lid but it&#039;s an easy fix (or ignore, really. I could just get rid of the stupid looms....). The other side doesn&#039;t have the same problem so it&#039;ll be a tad easier.<img src="http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1603.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />mold glassed and removed from the car. Later i&#039;ll be beefing up all three molds with lots of mat and resin. Probably another 2 gallons worth of resin or so. Also, there&#039;s a technique that you can use to add curves (strength) to the mold which I will do as well. All of this nonsense will be braced extensively as well, hoping not to lose any SPL to a weak box.i have monday off school so it&#039;s possible that lots of stuff will happen over the weekend. Stay tuned.</blockquote>

[QUOTE="martiandancer31, post: 7452479, member: 616516"] molded the right side of the trunk today: [IMG]http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1602.jpg[/IMG] this was a giant pain in the ballsack, mainly because of the trunk opening and closing. Essentially, I built a small frame in that area that barely clears the bars in both the open and closed positions, hot glued it into the trunk (for easy removal later), then taped around that. I made a small mistake due to the wire looms attached to the trunk lid but it's an easy fix (or ignore, really. I could just get rid of the stupid looms....). The other side doesn't have the same problem so it'll be a tad easier. [IMG]http://i968.photobucket.com/albums/ae168/martiandancer316/IMG_1603.jpg[/IMG] mold glassed and removed from the car. Later i'll be beefing up all three molds with lots of mat and resin. Probably another 2 gallons worth of resin or so. Also, there's a technique that you can use to add curves (strength) to the mold which I will do as well. All of this nonsense will be braced extensively as well, hoping not to lose any SPL to a weak box. i have monday off school so it's possible that lots of stuff will happen over the weekend. Stay tuned. [/QUOTE]

Verification