Reply to thread

Message: <blockquote data-quote="analogfreq" data-source="post: 8680755" data-attributes="member: 677695">I was just measuring the opening in the panel, and 5" is too small.  The bolt pattern diameter for the 5" driver below is too small for the opening.  6" driver is likely.  A 6.5" driver requires a spacer of some sort.  I am not totally against a 6.5",  but so far, the rest of the system is pretty incognito. A driver that fits in the factory opening is ideal.  Probably going to need some serious rattle chasing and damping in those cavities.I was just looking at this. I have built some subs from some larger Ciare drivers. Really nice speakers. [URL unfurl="true"]http://www.usspeaker.com/ciare%20hwg130-4ohm-1.htm[/URL]</blockquote>

Top