Reply to thread

Message

<blockquote data-quote="Stetsom Rep USA" data-source="post: 6341655" data-attributes="member: 613490">I think this amp at 650usd is what you want.Three good batteries and a 200 or better alt and you are set.V 5K2DFEATURES 5K2 D – 1 OHMSNumber of Channels:&nbsp; 1WRMS Power (1 ohm) to 13.8 V:&nbsp; 6.560 WattsWRMS Power (2 ohms) to 13.8 V: 4.140 WattsWRMS power (4 ohms) to 13.8 V: 2.330 WattsWRMS Power (1 ohm) to 12.6 V:&nbsp; 5.475 WattsWRMS Power (2 ohms) to 12.6 V: 3.600 WattsWRMS power (4 ohms) to 12.6 V: 1.985 WattsSupply voltage:&nbsp; 9 a 16VFrequency response: 20Hz a 8KHzLow Pass Crossover: 50Hz a 8KHzSignal Noise: &amp;gt; 90 dBTotal Harmonic Distortion:Input Sensitivity:&nbsp; 0.2 VInput Impedance: 20K ohms&nbsp; 20K ohmsLow Output Impedance: 1 OHMConsumption with dash: 3,5 a 260AConsumption with BASS Signal:&nbsp; 3,5 a 520ASubsonic filter: 20 to 80Hz 20 to 80HzDimensões (A x L x C) mm: 70 x 280 x 456Weight Kg: 6,6 Kg</blockquote>

[QUOTE="Stetsom Rep USA, post: 6341655, member: 613490"] I think this amp at 650usd is what you want. Three good batteries and a 200 or better alt and you are set. V 5K2D FEATURES 5K2 D – 1 OHMS Number of Channels: 1 WRMS Power (1 ohm) to 13.8 V: 6.560 Watts WRMS Power (2 ohms) to 13.8 V: 4.140 Watts WRMS power (4 ohms) to 13.8 V: 2.330 Watts WRMS Power (1 ohm) to 12.6 V: 5.475 Watts WRMS Power (2 ohms) to 12.6 V: 3.600 Watts WRMS power (4 ohms) to 12.6 V: 1.985 Watts Supply voltage: 9 a 16V Frequency response: 20Hz a 8KHz Low Pass Crossover: 50Hz a 8KHz Signal Noise: > 90 dB Total Harmonic Distortion: Input Sensitivity: 0.2 V Input Impedance: 20K ohms 20K ohms Low Output Impedance: 1 OHM Consumption with dash: 3,5 a 260A Consumption with BASS Signal: 3,5 a 520A Subsonic filter: 20 to 80Hz 20 to 80Hz Dimensões (A x L x C) mm: 70 x 280 x 456 Weight Kg: 6,6 Kg [/QUOTE]

Verification