kinetik 1400?

[MmatsDude 10+ year member]

i bet LOLi did a test with a 2400 max amps pm battery vs a 3 year old kinetik 1400. i didnt get "louder" nor sound better and the pm died faster (smaller capacity which was expected) and its voltage dropped .25 volts overnight after a charge..i am interested to test out a 5100 vs my 1400..just find it funny how a 1400 "rated watt" battery can actually run more than its rating in my big 3, stock alt where as a "bigger max amp" battery rated to do 1000 watts more hit the skids sooner than expected. if i was ever going to hook up 2400 watts too it i would have at least a 220 amp alt. my 1400 as the primary battery with a stock alt has powered as much as 1600 watts (rated) without flinching...go a bigger alt (which i have just not installed) i bet it could handle 2000+ watts without issue:laugh:

did u charge the pm properly b4 use?

 

[audiolife 5,000+ posts]

did u charge the pm properly b4 use?

yessum even with an agm auto charger.....the ammount of difference in volume between them you would need a db meter to tell the fractions of a DB between them when loaded down (not loaded down the difference would be less).. on an rta there was no difference between the 2 on my system. just today i spent 2 hours tuning (fixxing) what i did when running active and throwing a fusion 20001 on a M3 sub. when i dont run active i knock my driver side tweeter out of phase and when i hooked it back up i didnt so it made my stage seem a little low. i charged it up 3 times. once when my buddy brought it over (stinger 800 too) once after use in my test in my truck then once after i used it as a power supply for a charger...