Reply to thread

Message

<blockquote data-quote="keep_hope_alive" data-source="post: 8924640" data-attributes="member: 576029">Reposting to fix the image links.&nbsp; The trunk floor was very resonant and in needed of a lot of treatment.[ATTACH=full]72042[/ATTACH][ATTACH=full]72043[/ATTACH]After full coverage of CLD, the floor is very dead.[ATTACH=full]72044[/ATTACH][ATTACH=full]72045[/ATTACH]Then I covered the floor with CCF from my stock of Ensolite that I’ve had for a while.[ATTACH=full]72046[/ATTACH]I also treated the bottom of the rear deck with CLD[ATTACH=full]72047[/ATTACH]Then I covered it with CCF in order to hide the silver deadener since the rear deck is visible.[ATTACH=full]72048[/ATTACH]With the side panels fitted in place, the scope of CCF is sufficient, even though it’s not a perfect finish, it is hard to get a seamless install.[ATTACH=full]72049[/ATTACH]And here is a first look at where I plan on mounting the amps, a MV600/6i and a MV1000/1 with the MVi Hub.[ATTACH=full]72050[/ATTACH]The CCF has been really handy to reduce noise as well as more attractive when visible.</blockquote>

[QUOTE="keep_hope_alive, post: 8924640, member: 576029"] Reposting to fix the image links. The trunk floor was very resonant and in needed of a lot of treatment. [ATTACH type="full" alt="20231027_200929.jpg"]72042[/ATTACH] [ATTACH type="full" alt="20231027_200931.jpg"]72043[/ATTACH] After full coverage of CLD, the floor is very dead. [ATTACH type="full" alt="20231027_204209.jpg"]72044[/ATTACH] [ATTACH type="full" alt="20231027_204155.jpg"]72045[/ATTACH] Then I covered the floor with CCF from my stock of Ensolite that I’ve had for a while. [ATTACH type="full" alt="20231028_011955.jpg"]72046[/ATTACH] I also treated the bottom of the rear deck with CLD [ATTACH type="full" alt="20231028_004210.jpg"]72047[/ATTACH] Then I covered it with CCF in order to hide the silver deadener since the rear deck is visible. [ATTACH type="full" alt="20231028_012008.jpg"]72048[/ATTACH] With the side panels fitted in place, the scope of CCF is sufficient, even though it’s not a perfect finish, it is hard to get a seamless install. [ATTACH type="full" alt="20231028_013631.jpg"]72049[/ATTACH] And here is a first look at where I plan on mounting the amps, a MV600/6i and a MV1000/1 with the MVi Hub. [ATTACH type="full" alt="20231028_013350.jpg"]72050[/ATTACH] The CCF has been really handy to reduce noise as well as more attractive when visible. [/QUOTE]

Verification