Reply to thread

Message: <blockquote data-quote="plugitin" data-source="post: 6771305" data-attributes="member: 613102"><p>If you need help, let me know.  Its super easy to do.  Just try a few test pieces first.  I can't remember how deep i made the cuts for sure.  I think it was around 11/16 down, and space them 3/8 of an inch apart.  I just cut a circle at the radius for the bend i wanted, set it where i wanted the bend, and measured the distance between cuts out and marked them on my piece of mdf, if that makes sense.</p></blockquote><p></p>

Top