Kangaroux's 99 Pathfinder

[pro-rabbit 5,000+ posts]

Looks GAY......

I mean good

 

[Kangaroux 5,000+ posts]

Looks GAY......

I mean good

Gee thanks //content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif

 

[Kangaroux 5,000+ posts]

In regards to the wheel housings here are some pictures.

Compared with the right wheel housing which is "normal" size:

 

[Kangaroux 5,000+ posts]

If anyone has ever dealt with these vehicles and you have some insight then please chime in. I would really prefer not to have to build my box in 2 sections lol

 

[pro-rabbit 5,000+ posts]

On the left it is raised because of the fuel tank filler neck.

 

[brodeisel 10+ year member]

jesse i wanna know how hard those mids were for you to install. Do you think my car would need spacers for them. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[brodeisel 10+ year member]

jesse i wanna know how hard those mids were for you to install. Do you think my car would need spacers for them. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[brodeisel 10+ year member]

jesse i wanna know how hard those mids were for you to install. Do you think my car would need spacers for them. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[brodeisel 10+ year member]

jesse i wanna know how hard those mids were for you to install. Do you think my car would need spacers for them. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Kangaroux 5,000+ posts]

On the left it is raised because of the fuel tank filler neck.

Lame...alright.

And mike, it's a necessity that I make an adapter for my speakers cause the factory adapter is too small both width wise and depth. Take out the factory adapter, trace it out on a piece of MDF and then cut it out. Then cut out the speaker hole for the correct size. I'll post up a couple pics so you can see

 

[pro-rabbit 5,000+ posts]

Lame...alright.And mike, it's a necessity that I make an adapter for my speakers cause the factory adapter is too small both width wise and depth. Take out the factory adapter, trace it out on a piece of MDF and then cut it out. Then cut out the speaker hole for the correct size. I'll post up a couple pics so you can see

I would still cut it out and beat it down. You don't need gas for that thing.

 

[kramer_212 10+ year member]

in for the pics, products, progress, and possibly dirty pics/??

 

[i2ain2thunder 10+ year member]

may just be the camera but that volt meter looks really bright, hope it doesn't annoy you while driving, I know my led on my gain knob was redickulous I had to put some glaze on it.

 

[pro-rabbit 5,000+ posts]

may just be the camera but that volt meter looks really bright, hope it doesn't annoy you while driving, I know my led on my gain knob was redickulous I had to put some glaze on it.

Those volt meters are pretty bright. In the company truck I have it mounted behind some tinted plexi(where the stock temp/compas was) and it still lights up the front at night. If you use one I would put on a toggle switch or something.

 

[Kangaroux 5,000+ posts]

may just be the camera but that volt meter looks really bright, hope it doesn't annoy you while driving, I know my led on my gain knob was redickulous I had to put some glaze on it.

It's looks very bright in the pictures but when it's in the car it's about as bright as my headunit. It doesn't really distract me but I may put some sort of glaze over it at some point because it's hard not to see when it's dark out