Reply to thread

Message

<blockquote data-quote="Canaan" data-source="post: 8253504" data-attributes="member: 566706">600wrms is fine for the DD RL608&#039;s daily, but they can handle much more.&nbsp; Arc makes SOLID amps (I&#039;m an ARC dealer also, plenty of hands-on time).&nbsp; Also..33hz tuning is a little low for the 608&#039;s, from my experience.&nbsp; They are great daily subs, but the insane low freq is not their cup of tea...if you know what I mean.&nbsp; Most of the 608&#039;s have done have been 0.6cuft-1cuft per sub tuned 36-39hz (on-paper tuning).&nbsp; These subs can get plenty low with plenty of output, but tuning TOO LOW will kill the higher bass output.&nbsp; Also, their high motor force and suspension design requires a pretty large port area to limit port noise.If you or your shop/installer has any questions about enclosure design for these subs, just give me a call at the shop.Our phone number is in my sig, I&#039;ll be glad to help anyway I can.&nbsp; We are open 9-5:30M-F, 9-3sat, central time.</blockquote>

[QUOTE="Canaan, post: 8253504, member: 566706"] 600wrms is fine for the DD RL608's daily, but they can handle much more. Arc makes SOLID amps (I'm an ARC dealer also, plenty of hands-on time). Also..33hz tuning is a little low for the 608's, from my experience. They are great daily subs, but the insane low freq is not their cup of tea...if you know what I mean. Most of the 608's have done have been 0.6cuft-1cuft per sub tuned 36-39hz (on-paper tuning). These subs can get plenty low with plenty of output, but tuning TOO LOW will kill the higher bass output. Also, their high motor force and suspension design requires a pretty large port area to limit port noise. If you or your shop/installer has any questions about enclosure design for these subs, just give me a call at the shop. Our phone number is in my sig, I'll be glad to help anyway I can. We are open 9-5:30M-F, 9-3sat, central time. [/QUOTE]

Verification