Reply to thread

Message: <blockquote data-quote="limitkid7" data-source="post: 618296" data-attributes="member: 545328">hopefully you are going ported b/c its not wise to make the mistake that I did and go sealed (i have a 13)..  as far as amp for a 10w7, i'd say get these 2remember its svc 3ohm so you need something that puts out about 600 watts @ 3ohmsbut yet u're going to get the same brand to run your highs so you don't want to get some b/s stuff either (i suggest something that's 75x4 @ least)now if it were me and i had a 10w7 i'd do this.....bx1500d run it at 3ohms which means you should be getting b/w 500 &amp; 1000 watts .....then if you decide to add a 2ond later you'll have b/w 1000 and 1500 watts to push 2 (using the same amp).2nd i'd get a hifonics either z6400 or z4400 (i've had both and they are sufficient).</blockquote>

Top