Reply to thread

Message: <blockquote data-quote="qwiketz" data-source="post: 6604678" data-attributes="member: 617720"><p>okay... I tapped into the stock wires for the amplifier. I spliced into the yellow and red wire for the amp turn on. It isn't turning my amp on however. Also, when it is connected, the stock amp won't turn on so obviously the wiring is okay and power is flowing to the rockford amp.  Maybe all the current is going to the rockford amp instead of the stock amp.  Even with the stock amp unplugged, the rockford won't turn on.  Anyone run into this before? I thought it didn't take much power at all to turn on the amp.</p></blockquote><p></p>

Top