Reply to thread

Message

<blockquote data-quote="I Like Waffle" data-source="post: 6440906" data-attributes="member: 600248">If i am i honestly have no idea what im doing wrong, i have absolutely 0 problems with my other equipment thats been in there for 2+ years, only problems ive had as far as sub stages go is with this alpine amp. I havent even played it full tilt or low volted it gotten it hot or anything, it just bumped and shut off when i was cranking my car.I took the time to completely remove the gas tank, go under the car and run grounds from the trunk pan to the actual frame, then in the front i have grounds from frame - chassis, frame - batt, and batt-chassis on both batts. The batt in the trunk is practically grounded straight to the frame. I had no voltage issues whatsoever with this setup it just decided to fail me at the most random moment. I do plan on redoing my trunk grounds though and running 1/0 from the trunk batt to the frame, rather than to the chassis, then to the frame. This will all be done before the new amp goes in.</blockquote>

[QUOTE="I Like Waffle, post: 6440906, member: 600248"] If i am i honestly have no idea what im doing wrong, i have absolutely 0 problems with my other equipment thats been in there for 2+ years, only problems ive had as far as sub stages go is with this alpine amp. I havent even played it full tilt or low volted it gotten it hot or anything, it just bumped and shut off when i was cranking my car. I took the time to completely remove the gas tank, go under the car and run grounds from the trunk pan to the actual frame, then in the front i have grounds from frame - chassis, frame - batt, and batt-chassis on both batts. The batt in the trunk is practically grounded straight to the frame. I had no voltage issues whatsoever with this setup it just decided to fail me at the most random moment. I do plan on redoing my trunk grounds though and running 1/0 from the trunk batt to the frame, rather than to the chassis, then to the frame. This will all be done before the new amp goes in. [/QUOTE]

Verification