is this possible

[DoesDad 10+ year member]

For heavy tens, the measurements look excellent ported

For 3 or 2?

 

[audiobaun 5,000+ posts]

First two responses said its too small

Most deff too small for 3 tens,and the ohm load will be higher,as well as not performing as well as 2 tens at a better ohm load/serving justice

 

---------- Post added at 03:43 PM ---------- Previous post was at 03:42 PM ----------

 

For 3 or 2?

2/a pair of tens

 

[DoesDad 10+ year member]

Just wanted to clarify. That's what I think everyone has told him. He can't seem to get that. He either gets 2 10's that are going to make the IDMax's look like weak sauce (kinda tough imo) or maybe run a 15. But he doesn't have the room for 3 10's.

 

[kirby mane 10+ year member]

So what be the right size box for the three

 

[kirby mane 10+ year member]

I get it but nobody suggested what size it should be and what tens will make idmax look like weak sauce whatever that means

 

[audiobaun 5,000+ posts]

A pair of American Bass 12s in approx 4 cu ft ported to approx 32-36 htz with an American Bass mini hybrid 4480.1d,and you will crap all over those idmax:santa:

 

[audiobaun 5,000+ posts]

So what be the right size box for the three

You figure for ea ten you need a min of 1.4cu ft,up to 2.0+cu ft to serve any justice for that sub ported

 

[kirby mane 10+ year member]

So can somebody help me out i can go biggger with the depth just not height and width. Can i do subs top port back on something like that. I really dont want two anything all my other systems are either 2 tens or twelves. Just trying to do something different. I understand car audio just no enclosure building. Just looking for some help to reach my goal.

 

[audiobaun 5,000+ posts]

First...you need to give the maximum measurements of the space you are willing to give up,and what type of vehicle,and amp you will be using,your electrical supply you have in place,and as well as if you have done any deadining whatsoever,so we dont have to keep throwing different set ups at you.All vehicles are different to set ups,so any real information would be beneficial to make recommendations

 

[audiobaun 5,000+ posts]

You have mentioned the subs, and amp you want to use already.But,What do you have NOW?

 

[kirby mane 10+ year member]

So can i do two sa12 in the space given

 

[cra5h ov3ride 10+ year member]

Just a heads up, if the charger in your avatar is yours, you can go 16" high, 17 if you want it tight. Depth can be as much as 20", 22 if you want to modify the trunk opening slightly but you're losing the majority of your trunk with those dimensions.

 

[kirby mane 10+ year member]

Those are the max measurements thats all im willing to give up

 

[black05alti]

Look into DC subs.. They love small enclosures

 

[kirby mane 10+ year member]

Already have aubs taking them out of wifes car and putting in the 3 sa10s since they won't fit in my car local dealer had sale buy one get second half off so i bought 2 12s and 4 10s i got the 4th for free after you do the math