Is this a good alignment? *pic*

ultimate157
5,000+ posts

Engineering Student
So I just bought a grand cherokee, and my current CDT's (CL61A / TW-25) components are too big (mounting depth) to fit.

The doors hold a 6.5" speaker and the fronts have an elongated speaker grill. If I can fit the tweeter under that grill, flush mount, would that be a good place for the tweeter, on the same axis as the mid?

The speakers I'm looking at now are these:

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=4894&CFID=5127847&CFTOKEN=901f07d7127b59e3-96A520E1-1422-7C6E-50348EA7F9C80FFC

DriverDoor.jpg


 
with my 98 5.9 limited i installed some germs... just took some .75" birch and made a extention... sanded it down about half way and flush mounted them... the wood pops the door pannel out a bit so i made some lil fabbed fittings to keep it down... then glassed the tweeters into the a pillers....

 
with my 98 5.9 limited i installed some germs... just took some .75" birch and made a extention... sanded it down about half way and flush mounted them... the wood pops the door pannel out a bit so i made some lil fabbed fittings to keep it down... then glassed the tweeters into the a pillers....
thanks for the info

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

ultimate157

5,000+ posts
Engineering Student
Thread starter
ultimate157
Joined
Location
Worcester, ma
Start date
Participants
Who Replied
Replies
4
Views
732
Last reply date
Last reply from
ultimate157
design.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0
IMG_2118.jpeg

WNCTracker

    May 22, 2026
  • 0
  • 0

New threads

Top