Reply to thread

Message

<blockquote data-quote="acc03rd" data-source="post: 1236886" data-attributes="member: 564253">im just learning about audio&#039;s and stuff...so ya i got a question.im doing all eD setup in my car (Elemental designs)...for the fronts im going to have the eDi 6500s components...and in the rears two Eu-700 MidLFE Dual 2. both of them are 150w RMS...so i bought 2 of the NINe.2x (200w x 2channel 4ohms) basicly 1 amp for the 6.5&#039;s and 1 amp for the 6.5 rears...is that correct? i use a 2 channel amp for a pair of 6.5 fronts and another 2 channel amp for a pair of 6.5 rears?....to get the speakers full potential.i only want to use 3 amps at most, so would i be able to use a NINe.1 on TWO 13Kv.2 (12&quot; subs)?? its only a 1 channel amp and using 2 subs...would that be possible? would the subs still hit good? or should i run a diffrent eD amp for the 2 subs? the subs are 350w RMS. i was going to go with TWO NINe.2 (400w x 1 channel at 4ohms) basicly 1 for each sub. but i dont want to have 4 amps total in my car...so which amp should i go with for both subs?im using a DEH-P8600MP deck which has RCA connections for a amp for fronts/rears/ and subs...so it only has 3 RCA connectors. so my guess is thats only good for 3 amps?eD site is...http://www.edesignaudio.com</blockquote>

[QUOTE="acc03rd, post: 1236886, member: 564253"] im just learning about audio's and stuff...so ya i got a question. im doing all eD setup in my car (Elemental designs)...for the fronts im going to have the eDi 6500s components...and in the rears two Eu-700 MidLFE Dual 2. both of them are 150w RMS...so i bought 2 of the NINe.2x (200w x 2channel 4ohms) basicly 1 amp for the 6.5's and 1 amp for the 6.5 rears... is that correct? i use a 2 channel amp for a pair of 6.5 fronts and another 2 channel amp for a pair of 6.5 rears?....to get the speakers full potential. i only want to use 3 amps at most, so would i be able to use a NINe.1 on TWO 13Kv.2 (12" subs)?? its only a 1 channel amp and using 2 subs...would that be possible? would the subs still hit good? or should i run a diffrent eD amp for the 2 subs? the subs are 350w RMS. i was going to go with TWO NINe.2 (400w x 1 channel at 4ohms) basicly 1 for each sub. but i dont want to have 4 amps total in my car...so which amp should i go with for both subs? im using a DEH-P8600MP deck which has RCA connections for a amp for fronts/rears/ and subs...so it only has 3 RCA connectors. so my guess is thats only good for 3 amps? eD site is...http://www.edesignaudio.com [/QUOTE]

Verification