If familiar with PG ZX475ti....please read

[vshortt]

I'm having a bit of trouble with my amp. In the owners manual it shows a red LED under the smoked "glass" with the word "overload" next to it and explains what the deal is should you see the LED light up. In my amp, I see the red LED next to the word "overload" and it is NOT lit up. However, in the smoked "glass" on the other side there is another red LED and it IS lit up. Does anyone have any clue what this LED represents? It says nothing in the owners manual. Any help would be greatly appreciated.

Click to read more...

 

[casper97ta 10+ year member]

i used to own a lot of the old zx and ti series. what color is the light? if its the yellow one, that is for thermal overheating. were gonna need a little more info also. what kind of set up you running with it? and what is the exact problem you are having with the amp?i.e: no sound, going into protect?

 

[smgreen2043]

Casper, he noted it was red. I'm going to say it's the amp on light. I took it to the http://www.phoenixphorum.com PG forum. I'll post the replys, umless you want to check the lin yourself. http://phoenixphorum.com/post13225.html#13225

 

[vshortt]

Casper, he noted it was red. I'm going to say it's the amp on light. I took it to the http://www.phoenixphorum.com PG forum. I'll post the replys, umless you want to check the lin yourself. http://phoenixphorum.com/post13225.html#13225

You're correct. On the left side of the amplifier under the clear plex, there are actually 8 red LED's that show the amp to powered up and functioning properly. I contacted a tech at Phoenix Gold and they confirmed that all is well and that my concerns were of no concern at all. Thanks for the responses.

 

[vshortt]

One more thing. Thanks for going out of your way, smgreen. I clicked on the link to see that you'd posted my concern elsewhere. All is good. Thanks, man.