Reply to thread

Message: <blockquote data-quote="walkychalky" data-source="post: 3552567" data-attributes="member: 561771"><p>I installed my newest setup and everything was going good until i plugged the RCA's into the inputs on my 20.1 and got no sound. I had a problem with the RCA's coming loose from the circuit board before but never fixed it so i thought maybe the problem had just gotten worse. I tried re-soldering the connection but it still did not fix the problem. If i plug the RCA's into the input/ooutput for bridginfg i get sound but it is very poor and has alot of static coming from the signal. Is there any way to fix this? I bought the amp used a while back and it is no longer under warranty. Thanks!</p></blockquote><p></p>

Top