Reply to thread

Message: <blockquote data-quote="jeremyblevins" data-source="post: 7294662" data-attributes="member: 630319"><p>5. Load alternator to within 10% of rate output current, using a load tester across the battery and an ammeter at the alternator terminal (B+). Voltage should remain above 12 volts, while output is within 10% of rated current.</p><p></p><p>This is under their charging systems.pdf it says to test at 2000 rpms? so idk</p></blockquote><p></p>

Verification

Top

Menu