Reply to thread

Message

<blockquote data-quote="Raven" data-source="post: 1289052" data-attributes="member: 558368">Oh man... my brother&#039;s truck..I did an strictly bass install in it by putting my Beals 8s under the back seats attached to a Jensen JXP460. It was like 0.1 cubes apiece sealed but he liked it. During the install the fuse blew. Well, I put a thin piece of 18 guage wire in it&#039;s place, and I told him to go get a real 40 amp fuse the next day. A week goes past and I hear nothing about it. I find his truck out in the back yard after he washed it one day, so I went to check on the fuse. Sure enough, the wire was still there. He hadn&#039;t replaced it. On top of that, he tried to move things around so he could put in a toolbox. He&#039;d pulled on the amp so hard that the ground came off, and had welded itself to the amp&#039;s heatsink. One of the subs was not hooked up, the other barely hanging on.Longer story short, I pulled everything. They remain in safe places to this day.</blockquote>

[QUOTE="Raven, post: 1289052, member: 558368"] Oh man... my brother's truck.. I did an strictly bass install in it by putting my Beals 8s under the back seats attached to a Jensen JXP460. It was like 0.1 cubes apiece sealed but he liked it. During the install the fuse blew. Well, I put a thin piece of 18 guage wire in it's place, and I told him to go get a real 40 amp fuse the next day. A week goes past and I hear nothing about it. I find his truck out in the back yard after he washed it one day, so I went to check on the fuse. Sure enough, the wire was still there. He hadn't replaced it. On top of that, he tried to move things around so he could put in a toolbox. He'd pulled on the amp so hard that the ground came off, and had [I]welded[/I] itself to the amp's heatsink. One of the subs was not hooked up, the other barely hanging on. Longer story short, I pulled everything. They remain in safe places to this day. [/QUOTE]

Verification