Reply to thread

Message: <blockquote data-quote="TreyE" data-source="post: 8502664" data-attributes="member: 567385">If you go active, yes you need a channel for each of the speakers unless your amp will put out enough power to wire multiple ones up then you could go down on the final resistance, again if your amp can handle it.No you cannot wire your tweets to your mids as they both need to have different crossover points, which is currently what your passive crossovers are doing. When you go active you have to set those crossover points yourself.Yes you can still use the passive crossovers but then you wouldn't be using the processor to its full potential imo. What tweets/mids/subs/head unit do you have?</blockquote>

Top