Reply to thread

Message: <blockquote data-quote="shredder2" data-source="post: 8629938" data-attributes="member: 674047">I'd shorten the ports 1/2" and round over the portwall materials for the inside out towards the outer pvc wall just to be sure, a flare needs less clearance but dont flare em, just round em over to increase the port area at the end it's close to the box wall, and shortening em 1/2" will only change tuning slightly, without looking I'm sure it'll still be around or under 33hz so you'll probably never notice the difference anyways.Shortening the ports will change volume, but it's a slight change, and combined with the roundover (1/4"?) the tune WILL change... but not by much.Looks to me like you finally got it beat... good luckAnd being close might lower the tune back anyways... lol... I'd say go for it.</blockquote>

Top