Reply to thread

Message

<blockquote data-quote="i2ain2thunder" data-source="post: 8080844" data-attributes="member: 631331">These are specs I found for this MMATS amp below.M1400.1D/M1400.2DM1400.1&nbsp; &nbsp; &nbsp; &nbsp;&nbsp; M1400.2STABLE TO:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1 ohm&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2 ohmCONTINUOUS (RMS) POWER@ 13.8 Volts:Watts @ 1 ohms mono&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 1 X 1400&nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; N/AWatts @ 2 ohms mono&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 1 X 750&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 1 X 1400Idle Current:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 1.5 amp&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 1.5 ampSignal to Noise Ratio A-Wtd:Total Harmonic Distortion:&nbsp; &nbsp; &nbsp;&nbsp; 0.3%&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 0.3%Channel Separation:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; N/A&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; N/AInput Sensitivity:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 150mV-2.5V&nbsp; &nbsp; &nbsp; 150mV-2.5VSlew Rate:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 13V / Usec&nbsp; &nbsp; &nbsp; &nbsp; 13V / UsecFuse Rating:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 80 amp&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 80 ampDimensions:Height:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 2.25”&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2.25”Width:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 9.5”&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 9.5”Length:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 8”&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; 8”General Information:Frequency Response:Low-pass Filter:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp; Variable 24db, 77 to 275HzBattery Connectors:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 2 GaugeSpeaker Connectors:&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 8 GaugeNow I understand MMATS are very good amps, US Made underrated, blah blah.As far as I understand basic electric Volts x Amps = Watts...so this amp uses 80 amps for fuse rating.&nbsp; Constant voltage to the amp will prob be around 12-14 volts. no this gives us a maximum watts of between 960 and 1120 Watts,SooooooooooooHow come it is rated for 1400 Watts RMS?</blockquote>

[QUOTE="i2ain2thunder, post: 8080844, member: 631331"] These are specs I found for this MMATS amp below. M1400.1D/M1400.2D M1400.1 M1400.2 STABLE TO: 1 ohm 2 ohm CONTINUOUS (RMS) POWER @ 13.8 Volts: Watts @ 1 ohms mono 1 X 1400 N/A Watts @ 2 ohms mono 1 X 750 1 X 1400 Idle Current: 1.5 amp 1.5 amp Signal to Noise Ratio A-Wtd: Total Harmonic Distortion: 0.3% 0.3% Channel Separation: N/A N/A Input Sensitivity: 150mV-2.5V 150mV-2.5V Slew Rate: 13V / Usec 13V / Usec Fuse Rating: 80 amp 80 amp Dimensions: Height: 2.25” 2.25” Width: 9.5” 9.5” Length: 8” 8” General Information: Frequency Response: Low-pass Filter: Variable 24db, 77 to 275Hz Battery Connectors: 2 Gauge Speaker Connectors: 8 Gauge Now I understand MMATS are very good amps, US Made underrated, blah blah. As far as I understand basic electric Volts x Amps = Watts...so this amp uses 80 amps for fuse rating. Constant voltage to the amp will prob be around 12-14 volts. no this gives us a maximum watts of between 960 and 1120 Watts, Soooooooooooo How come it is rated for 1400 Watts RMS? [/QUOTE]

Verification