Reply to thread

Message: <blockquote data-quote="Prowler573" data-source="post: 3073837" data-attributes="member: 561023">(a) If it blew a fuse rated at a higher amperage than the amp is even designed to draw at full tilt that, at least to me, would indicate that the amp didn't particularly care for the manner in which it was being treated(b) Just because it didn't blow the 100a fuse doesn't mean it is 1 Ohm stable. Are you certain there was no enclosure rise coming into play keeping the amp at juuuuust high enough of a resistance load to not blow that 100a fuse?Reference TommyK90's latest thread. Impedence rise of 3.2 Ohms or something like that! I would wager that isn't anywhere near where he actually has them wired...Just my $0.02 ~</blockquote>

Top