Reply to thread

Message: <blockquote data-quote="95BlackGA" data-source="post: 3073645" data-attributes="member: 576452"><p>The only reason why I put a higher amperage fuse in is because I went BACK DOWN to a 4 ohm load. It was fine for the time that the fuse was in there. I was pulling no more than 60amps. It was a temp solution to put in the 100 amp, now it's back down to an 80 amp. I could even use a 60amp, but I'm still with an 80amp, is that pushing it too far also?</p></blockquote><p></p>

Top