Reply to thread

Message

<blockquote data-quote="amartin_72" data-source="post: 6368460" data-attributes="member: 564679">I have tried two boxes with my 10&quot; HDC3. First was 1.6ft@36hz, 26in port area. The second box is 1.3ft@35hz with 20in Port area. The second box helped but I still get a noise that sounds like the dust cap is wrinkling not really the coil to back-plate sound that i&#039;ve heard a long time ago with other subs but it just seems like I could turn it up more except for that noise, it gets louder and louder but the noise comes in at about 2&quot; total excursion.(DJ at AQ said let them play up to 3&quot; total) Should I just resin the cap a little? Or Try an even smaller box, 1.1 ft, 20In port area 36hz tuning? Anyone heard this noise in other subs and is it OK to just let it play like that? Could it be lack of power my voltage only drops to about 12.1v and the amps are running cool.Maybe Im asking too much from a 230 dollar sub. Should&#039;ve went with an aluminum with more spiders or a DC lvl5.</blockquote>

[QUOTE="amartin_72, post: 6368460, member: 564679"] I have tried two boxes with my 10" HDC3. First was 1.6ft@36hz, 26in port area. The second box is 1.3ft@35hz with 20in Port area. The second box helped but I still get a noise that sounds like the dust cap is wrinkling not really the coil to back-plate sound that i've heard a long time ago with other subs but it just seems like I could turn it up more except for that noise, it gets louder and louder but the noise comes in at about 2" total excursion.(DJ at AQ said let them play up to 3" total) Should I just resin the cap a little? Or Try an even smaller box, 1.1 ft, 20In port area 36hz tuning? Anyone heard this noise in other subs and is it OK to just let it play like that? Could it be lack of power my voltage only drops to about 12.1v and the amps are running cool. Maybe Im asking too much from a 230 dollar sub. Should've went with an aluminum with more spiders or a DC lvl5. [/QUOTE]

Verification