Reply to thread

Message: <blockquote data-quote="GI JOEY" data-source="post: 6653345" data-attributes="member: 566306"><p>With the seat lifted 2" and having 54.5 wide 18 deep and 12 in front and 11 in the back there is just enough aispace for the 4 10"s. The port will be external so that wont rob airspace. I only need 1 cube per sub. With the fiberglassed bottom and the subs frontfiring there will be roughly 5 cubes before DD. So I will have around 4.5 after DD. Thats good enough for the re se 10"s. I would take the 2 12"s sealed but you should be able to get them ported if you build an external slot port comming off the back of the box pointed to the side, There is plenty of room there. Just look at it with the seat raised.</p></blockquote><p></p>

Top