Reply to thread

Message: <blockquote data-quote="tommydh" data-source="post: 8181099" data-attributes="member: 640628"><p>I would check the wire for shorts to ground. Then I would use a SPDT or SPST relay to trigger the remote turn on.  Use the HU remote to power the coil (85) ground 86 run a separate 12v feed from either your Battery, distroblock or wherever you decide fused to the normally open set of contacts 30 and 87. I included the terminal connections for lack of knowing your background and helpful info. Hope you find the issue.</p></blockquote><p></p>

Top