Reply to thread

Message: <blockquote data-quote="thevic24" data-source="post: 7308779" data-attributes="member: 575973"><p>No, pull the power, ground and remote wires from the amp along with the fuse that is on the amp.</p><p></p><p>Then test between the power and ground, you should get nothing. Then put the fuse back in and test it again. You should still</p><p></p><p>get nothing. If you get continuity between the + and - at any time, there is a problem.</p></blockquote><p></p>

Verification

Top

Menu