Reply to thread

Message

<blockquote data-quote="1aespinoza" data-source="post: 8710453" data-attributes="member: 654802"><p>Welcome JojoGutts. I would install the 6500s in the front and 6000s in the deck. The front tweeter can be mounted in what is known as the &quot;sail&quot;. It is that corner area that covers the bolts for the side mirrors. On the rear, you can mount them right next to the grille of the 6.5s. I assume you got them with the whole kit and kaboodle, so there have to be mounting cups to mount them on the surface. Or you can use the flush mount cups, but you would have to use a hole saw and that is a little more difficult. Those sets come with crossovers so there is really no need to mess with the amp&#039;s crossovers. Only thing you will tune is the GAIN knob on the amp. When all is connected, you turn the gain full counterclockwise. Turn on radio to about 75% of it&#039;s volume. Now turn GAIN clockwise until the speakers distort a bit, then dial it back a little. You are done. Any more Qs, we are here.</p></blockquote><p></p>

[QUOTE="1aespinoza, post: 8710453, member: 654802"] Welcome JojoGutts. I would install the 6500s in the front and 6000s in the deck. The front tweeter can be mounted in what is known as the "sail". It is that corner area that covers the bolts for the side mirrors. On the rear, you can mount them right next to the grille of the 6.5s. I assume you got them with the whole kit and kaboodle, so there have to be mounting cups to mount them on the surface. Or you can use the flush mount cups, but you would have to use a hole saw and that is a little more difficult. Those sets come with crossovers so there is really no need to mess with the amp's crossovers. Only thing you will tune is the GAIN knob on the amp. When all is connected, you turn the gain full counterclockwise. Turn on radio to about 75% of it's volume. Now turn GAIN clockwise until the speakers distort a bit, then dial it back a little. You are done. Any more Qs, we are here. [/QUOTE]

Verification